Shop Stories
Before and After: 17-4 Stainless Steel Firearm ...
Process Developed: Machine: Mr. Deburr 300 1. 2.5 Hours Angle Cut Triangle SF 7/8 X 7/8 with VF-100 Finishing Compound 2. 45 Minutes with Angle Cut Cylinder 3/16 X 3/8 Porcelain...
Before and After: 17-4 Stainless Steel Firearm ...
Process Developed: Machine: Mr. Deburr 300 1. 2.5 Hours Angle Cut Triangle SF 7/8 X 7/8 with VF-100 Finishing Compound 2. 45 Minutes with Angle Cut Cylinder 3/16 X 3/8 Porcelain...
Graveyard Carz gets it done with their #MrDebur...
Mark over at Graveyard Carz details how he uses his #MrDeburr DB600 to clean up and restore #MOPAR auto parts for his show on MotorTrend TV. He is using general purpose ceramic abrasive media...
Graveyard Carz gets it done with their #MrDebur...
Mark over at Graveyard Carz details how he uses his #MrDeburr DB600 to clean up and restore #MOPAR auto parts for his show on MotorTrend TV. He is using general purpose ceramic abrasive media...
Before and After: Soiled and Rusty Steel MOPAR ...
Restoring and rebuilding MOPAR classic cars is one of the original uses for the Mr. Deburr line of vibratory finishing machines. The process can transform old, rusty, greasy parts into...
Before and After: Soiled and Rusty Steel MOPAR ...
Restoring and rebuilding MOPAR classic cars is one of the original uses for the Mr. Deburr line of vibratory finishing machines. The process can transform old, rusty, greasy parts into...
Before and After: Stainless Steel Laser Cut Bur...
Frequently we are asked to deburr and clean parts that have been laser or plasma cut. This is a common application for the C&M Topline Mr. Deburr machine and good...
Before and After: Stainless Steel Laser Cut Bur...
Frequently we are asked to deburr and clean parts that have been laser or plasma cut. This is a common application for the C&M Topline Mr. Deburr machine and good...
Before and After: Stainless Steel Golf Putters
Process Developed: Machine: Mr Deburr DB300 Two Hours with Angle Cut Triangle 7/8 X 7/8 SF 45 minutes with Angle Cut Cylinder 3/16 X 3/8 P Compound: VF100 with the SF Media, VF150 with...
Before and After: Stainless Steel Golf Putters
Process Developed: Machine: Mr Deburr DB300 Two Hours with Angle Cut Triangle 7/8 X 7/8 SF 45 minutes with Angle Cut Cylinder 3/16 X 3/8 P Compound: VF100 with the SF Media, VF150 with...
Before and After: Glass and Iron Filled Thermo...
Plastic parts are notoriously difficult o run in a tumbling process. For this part the goal was to remove the mold parting line and impart a matte finish for a...
Before and After: Glass and Iron Filled Thermo...
Plastic parts are notoriously difficult o run in a tumbling process. For this part the goal was to remove the mold parting line and impart a matte finish for a...