Before and After: Glass and Iron Filled Thermoset Plastic

Before and After:  Glass and Iron Filled Thermoset Plastic

Process Developed:

Machine: Mr Deburr DB300

  1. 1.5 Hours with ceramic ATS 7/8 X 3/8 SF
  2. Compound: VF100
Results:

Plastic parts are notoriously difficult o run in a tumbling process. For this part the goal was to remove the mold parting line and impart a matte finish for a second post process. We chose a fast cutting, large size ceramic media in order to effectively abrade the plastic. The tumbling process has removed the raised parting line quite effectively in a short period of time. This result is seen on all parts both glass and iron filled. 

Before on Left, After On Right

Leave a comment

Please note, comments must be approved before they are published