Reactive Separating Agent: Clay based waste water treatment powder used in treatment of spent tumbling fluid.  Will allow one-step entrapment of emulsified oils and dissolved metals from various waste streams. Use manually or in a tumbling waste filtration system as a simple and environmental alternative to the cost of hauling wastewater to be treated off-site, while ensuring that treated effluent will meet Publicly Owned Treatment Works (POTW) discharge limits established by local and state authorities

Flocculent will remove the following contaminants from waste streams:

• Heavy Metals 
• Oils and Grease 
• Suspended Solids

Instruction for basic/manual use:

• Fill pail with wastewater and flocculant at 12 ounces per 30 gallons of fluid
• Manually or using a mixer, mix for 2-3 minutes (If the consistency becomes slimy you have over-mixed the batch)
• Let settle for 3-5 minutes
• Mix for an additional 30 seconds
• Let settle for 3-5 minutes
• Pour off through a filter or open valve in system through filter to allow effluent to filter out solids
• Clean water poured off can be collected and typically discharged to your public waste water system depending on your local laws and requirements.
• Note: The flocculent doesn't remove chemicals, only solids.

Technical Data Sheet