Automate your costly and labor intensive part deburring, finishing, and cleaning with the MiniMax Rotary finishing machine by C&M Topline. Get more done in less time.

• Dimensions:  Length 23″ x Width 16″ x Height 13″
• Bar Length:  9.25″
• Bar Diameter: 1"
• Approx. Bar RPM: 467 Low, 707 High
• Inside Bar Spacing:  4.5″
• Motor:  1/3 HP – RPM: 1725/1140
• Voltages Available: 110v, 60Hz or 220v, 50Hz

See barrel chart below for the approximate RPM each barrel would rotate on HI or LOW speed.

• Note: Barrels pictured above not included with machine purchase

*Barrel RPM is approximate and can vary 
*Small cosmetic imperfections in the topcoat paint such as hairline cracks and corner chips occasionally occur during normal ground shipment handling. Cosmetic imperfection do not affect operation. Please contact us if you have questions or concerns.