Featuring an oil-filled motor housing with a radial lip seal on the motor shaft. They have an exceptional life expectancy because the oil serves as a continuous lubricant for all moving parts and the shaft seal. This non-toxic dielectric oil, often paired with an aluminum, cast iron or plastic housing, also helps dissipate the heat build-up found in a continuously running pump. This pump will work with oil-based solvent or water and compound.

1-T 1/150 hp 205 gph Oil-Filled Direct Drive Industrial Submersible Pump w/ 10 ft. Cord & Protection, 115V-60Hz

**FOR A LOW COST ALTERNATIVE TRY THE BECKETT STYLE PUMP HERE**

Tips for Pump Longevity:

• Clean the fluid used in your machine daily. Dirty water reduces pump life
• Always have the pump mounted on the bracket suspended above the bottom of your pail. This prevents the pump from in-taking excessive sediment from the tumbling process
• Never run the pump dry

Features:

• Epoxy coated die-cast aluminum housing
• Oil-filled motor
• 7.4' maximum lift
• 70 watts
• 1/4" MNPT discharge
• Thermal overload protection
• For submersible use only

Application:

• Water transfer or re circulation, and water displays

Construction:

• Motor - 1/150 HP Oil Filled.
• Intermittent Liquid Temp. up to - 120° F.
• Intake - N/A.
• Discharge - 1/4" MNPT.
• Housing - Epoxy coated cast aluminum
• Cover - Epoxy coated cast aluminum
• Volute - Polypropylene
• Impeller - Polypropylene
• Shaft Seal - Nitrile
• Screen - Polyethylene

*90 Day Warranty Period. Pump life is dependent upon proper operation. Never run pump dry and ensure your pump is properly suspended above any processing sediment.