Deburring & Finishing Machines

1 2

candmtopline

2 Bar, 2 Speed (Hi/Lo) Rotary Tumbler

2 Bar, 2 Speed (Hi/Lo) Rotary Tumbler

TL2B2SD000
$1,400.00 USD
$1,400.00 USD
Sale Sold out
Shipping calculated at checkout.

Add Ons:

TL-2
TL-2
$125.00
TL-3
TL-3
$162.00
TL-4
TL-4
$212.00
TL-6
TL-6
$320.00

Automate and control your sensitive and labor intensive part finishing, and polishing with the 2 bar, Variable Speed Rotary finishing machine by C&M Topline. Get more done in less time.

  • Dimensions:  Length 36″ x Width 19" x Height 13-1/2″
  • Bar Length:  24″
  • Bar Diameter: 1"
  • Approx. Bar RPM:  467 Low, 707 High
  • Inside Bar Spacing:  7-1/2″
  • Motor:  1/3 HP – RPM: 1725/1140
  • Voltages Available: 110v, 60Hz 

See barrel chart below for the approximate RPM each barrel would rotate on HI or LOW speed.

  • Highly polished white painted fiberglass base designed for easy clean up*
  • Made for industrial and laboratory applications
  • Solid steel bars cast in high quality urethane
  • All three bars are belt driven and fitted with ball bearings
  • Available in 120 volts 60 hertz
  • Ideally suited for any precision tumbling activity
  • Note: Barrels pictured above not included with machine purchase
  • Made in the USA
  • Note: Barrels pictured above not included with machine purchase

    *Barrel RPM is approximate and can vary 
    *Small cosmetic imperfections in the topcoat paint such as hairline cracks and corner chips occasionally occur during normal ground shipment handling. Cosmetic imperfection do not affect operation. Please contact us if you have questions or concerns.

    View full details

    Customer Reviews

    Based on 2 reviews
    50%
    (1)
    50%
    (1)
    0%
    (0)
    0%
    (0)
    0%
    (0)
    D
    Domingo
    Rotary Tumbler

    Good quality, low foot print, prompt and reliable service

    M
    Michael Mekash
    Works great but has cosmetic issues out of the box.

    It has stress crack where the plate that holds the electric motor. Did not notice it until I spilled a little burnishing fluid on it. It’s brand new and when I get back from traveling I’m going to call to get it replaced. Works fantastic tho.

    Hi Michael, Thanks for the review. Please note that small cosmetic imperfections in the topcoat paint such as hairline cracks and corner chips occasionally occur during normal ground shipment handling. Cosmetic imperfections do not affect operation as you have stated. Please contact us at info@cmtopline.com if you have further questions or concerns.