Featuring an oil-filled motor housing with a radial lip seal on the motor shaft. They have an exceptional life expectancy because the oil serves as a continuous lubricant for all moving parts and the shaft seal. This non-toxic dielectric oil, often paired with an aluminum, cast iron or plastic housing, also helps dissipate the heat build-up found in a continuously running pump. This pump will work with oil-based solvent or water and compound.
1-T 1/150 hp 205 gph Oil-Filled Direct Drive Industrial Submersible Pump w/ 10 ft. Cord & Protection, 115V-60Hz
Tips for Pump Longevity:
Clean the fluid used in your machine daily. Dirty water reduces pump life
Always have the pump mounted on the bracket suspended above the bottom of your pail. This prevents the pump from in-taking excessive sediment from the tumbling process
Never run the pump dry
Features:
Epoxy coated die-cast aluminum housing
Oil-filled motor
7.4' maximum lift
70 watts
1/4" MNPT discharge
Thermal overload protection
For submersible use only
Application:
Water transfer or re circulation, and water displays
Construction:
Motor - 1/150 HP Oil Filled.
Intermittent Liquid Temp. up to - 120° F.
Intake - N/A.
Discharge - 1/4" MNPT.
Housing - Epoxy coated cast aluminum
Cover - Epoxy coated cast aluminum
Volute - Polypropylene
Impeller - Polypropylene
Shaft Seal - Nitrile
Screen - Polyethylene
*90 Day Warranty Period. Pump life is dependent upon proper operation. Never run pump dry and ensure your pump is properly suspended above any processing sediment.
We don't properly maintenance ours but they still last 2-3 years running 60-70 hours a week on average. We just keep a couple in our stock room and switch them out as needed.
