Finishing Tank Accessories

Tank Divider for Mr. Deburr DB300 (3 Cubic Foot) Machine

Tank Divider for Mr. Deburr DB300 (3 Cubic Foot) Machine

Regular price $55.00 Sale

The DB300 tank divider makes it easy to:

Run multiple batches of parts at the same time
Run multiple media sizes and/or shapes at the same time
Reduce part impingement on soft materials
Made in the USA
Easy to install at any location
Simple and sturdy design and construction

Installation:

Simply decide where you want the divider to be located for your application
Place the divider in the chosen location

Ensure the notched end at the top fits around the spray bar that runs across the back of the tank
The divider is not meant to sit in between the ribs of the liner

It should sit on top of the ribs and have a snug fit

Occasionally the divider may be slightly oversized and difficult to fit.

In this case lightly sand the edges of the divider until it can be put in place.

Mark holes to be drilled
Drill two 5/16” holes
After drilling holes, fasten in place with included nuts and bolts.

Note: The set of three pre-drilled holes are used for the sound abatement cover attachment and are not meant for divider mounting

Download Instructions

*Note The Mr Deburr tanks have natural slight variations due to the urethane liner properties. For this reason the divider assemblies will not have an air or liquid tight fit. Very small millimeter sized medias or parts may pass through or become lodged between the divider and liner in some cases

Related Products

Mr Deburr Sound Abatement Cover (DB300)

Mr Deburr Sound Abatement Cover (DB600)

Tank Divider for Mr. Deburr D600 (6.5 Cubic Foot) Machine

10 Gallon Bucket

7 Gallon Bucket

Raytech Separating Screens

Little Giant Pump for Fluid Systems

Mr. Deburr Replacement Spring

Mr. Deburr Replacement Spring Retainer

Mr. Deburr Complete DB300 Spring Kit

Mr. Deburr Complete DB600 Spring Kit

Mr. Deburr DB300 Drive Belt

Mr. Deburr DB300 Complete Bearing Assembly

Mr. Deburr DB600 Complete Bearing Assembly

Mr. Deburr DB300 Pillow Block Bearing

Mr. Deburr DB300 Shaft Pulley

Mr. Deburr DB300 Motor Pulley

Mr. Deburr DB300 Drive Shaft

Mr. Deburr DB300 Shaft Weight

Mr. Deburr DB300 3/4 Horsepower, Single Phase Motor

Mr. Deburr DB600 Split Bearing Housing

Mr. Deburr DB600 Bearing Sleeve Adapter

Mr. Deburr DB600 Roller Bearing

Mr. Deburr DB600 Drive Shaft

Mr. Deburr DB600 Motor Pulley

Mr. Deburr DB600 Shaft Pulley

Mr. Deburr DB600 Drive Shaft Weight

Mr. Deburr DB600 3 Phase, 3 HP Replacement Motor

Mr. Deburr DB600 Split Housing Seal

Mr. Deburr DB600 Spray Bar Assembly

Mr. Deburr DB300 Spray Bar Assembly

Mr. Deburr DB600 Drive Belt

Fluid System Pail Liners, Box of 100

Motor Starter Kit fo 3HP, 3PH Motors

V-102 Fluid System

Mr. Deburr 300DB (3 Cubic Foot)

Mr. Deburr 600DB (6.5 Cubic Foot)

Tank Divider for Mr. Deburr D600 (6.5 Cubic Foot) Machine

7 Gallon Bucket

10 Gallon Bucket

Motor Starter Kit fo 3HP, 3PH Motors

Mr. Deburr DB300 Pillow Block Bearing

Mr. Deburr DB300 Spray Bar Assembly

Mr. Deburr Complete DB300 Spring Kit

Mr. Deburr DB300 3/4 Horsepower, Single Phase Motor

Mr. Deburr DB300 Complete Bearing Assembly

Mr. Deburr DB300 Drive Belt

Mr. Deburr DB300 Drive Shaft

Mr. Deburr DB300 Motor Pulley

Mr. Deburr DB300 Shaft Pulley

Mr. Deburr DB300 Shaft Weight

Mr. Deburr DB600 3 Phase, 3 HP Replacement Motor

Mr. Deburr DB600 Bearing Sleeve Adapter

Mr. Deburr DB600 Complete Bearing Assembly

Mr. Deburr DB600 Drive Belt

Mr. Deburr DB600 Drive Shaft

Mr. Deburr DB600 Drive Shaft Weight

Mr. Deburr DB600 Motor Pulley

Mr. Deburr DB600 Roller Bearing

Mr. Deburr DB600 Shaft Pulley

Mr. Deburr DB600 Split Bearing Housing

Mr. Deburr DB600 Split Housing Seal

Mr. Deburr DB600 Spray Bar Assembly

Mr. Deburr Replacement Spring

Mr. Deburr Replacement Spring Retainer

Mr. Deburr Complete DB600 Spring Kit

TLV 75 & 50 Sound Cover Knob (Mr Deburr Discharge Door)