Shop Blog

Before and After: Aluminum 6061 CNC Parts Deburred

Before and After: Aluminum 6061 CNC Parts Deburred

Process Developed: Machine: Mr Deburr DB300 Two Hours with Tetrahedron 3/4 X 3/4 X 3/4 X Green Plastic Compound: VF77 Results:This is a very co...

Before and After: Aluminum Deburr and Polish

Before and After: Aluminum Deburr and Polish

Process Developed: Machine: Mr Deburr DB300 Two Hours with Angle Cut Triangle 7/8 x 3/8 SF ceramic Thirty minutes with Angle Cut Cylinder 3/16 X ...

Before and After: Titanium Turbine Blades

Before and After: Titanium Turbine Blades

Results:

The blades provided had many hours of use in the field at temperature. The surfaces of each blade were blackened by heat exposure. The process significantly brightened each blade and removed any surface imperfections caused by the combustion process

Cleaning Brass Ammunition Shells for Reloading

Cleaning Brass Ammunition Shells for Reloading

There are five components to the brass cleaning process:The Machine, The Fluid System, Media and Compound Selection, Brass Shell Separation, Drying

Before and After: Bronze Casting

Before and After: Bronze Casting

Welcome to the first installment of our "Before and After"  series. On a daily basis we are testing parts and customizing processes for our custome...